sleeper heads

[drahthaar1]

I think I saw someone do it but will the sleeper head fit on the active fullbodies.

Thanks
Joe

[Rusty Hallock]

Joe,



A few of the Avery Pro-Staffers custom fitted sleeper heads to their GHG Active Full Bodies. For 2006, GHG is offering sleeper full bodies in their Pro-Grade and FFD Elite Full Bodies.

[drahthaar1]

Rusty,
They are just sleeper then or heads that will attach to the full bodies?
Joe

[Rusty Hallock]

Joe,



I am not sure if the new sleeper full bodies are one piece or the head and body are seperate. The new sleeper full body sleeper pictures have not been posted on the Avery Message Board.

[T.J. Owens]

Joe,

I did my sleeper heads awhile back. I found this pic and thought I would share it. I cut the bottom of the sleeper head off as you can see on the right hand side. I placed the head on the full body active style decoy where I thought it looked best. I had the foot base removed and ran a screw on the inside of the body into the flat part of the head where it meets the body. Hope this helps you out.
http://i2.photobucket.com/albums/y15/towens/100_0603.jpg

Best of luck,
T.J.

[Rusty Hallock]

TJ,



Thanks for posting the picture.

[Bearman]

T.J..............you need to get organized!

[T.J. Owens]

T.J..............you need to get organized!

I know... The linesman's pliers should have been to the right of the needle nose. Thanks for seeing that, and I have made the change. HAHAHA

Thanks,
T.J.