mojo in deep water

[NYhunter]

can you guys show me your mojo decoyset up or what you use for a stake in deep water

[Rich Good]

I have used PVC pipe of various lengths ! Up to 12 + feet !

[goetler]

I have used 1/2" & 3/4" conduit painted black for the last 6 years. Most of the square tubing that comes with the mojos fits on one or the other. I dont use any pins

[David Ortley]

I use an eight foot piece of steel tubing that fits the stub on the Mojo. The end is cut at an angle so it goes into harder bottoms easier. I will be adding a short "handle" to it that will be two feet from the top so I can pull it from the muck easier when I come by in the boat.

[NYhunter]

that helps kinda but i dont have a mojo i mispoken i have a robo duck do you guys have any ideas or have any pictures of the robo duck sorry guys and do u know if the robo duck works just a good as the mojo does

[Ben Hucks]

i use a piece of 18" x 18" x 1/2" think plywood with a piece of 2" blue board insulation glued to the bottom of it to make it float. i have a piece of 1" tubing mounted to the top of the plywood that is 24" long that i put the motion duck down in. I have a weight in the front that i drop down and you can use this set up in as deep of water that you want.

[Corey Sorensen]

In Michigan there is a company called Inovative Sportsman,,,they make what is called a deep water duck....It works great!! it is an innertube with a pole in the middle for the Robo/Mojo duck and you put a small anchor on the bottom to counter balance it...I think they have a website...It may be something to look into. I have 2 and love them! Good luck

Corey

[Zach Byron]

how deep of water are we talking? for like 4 feet of water and a couple feet of muck, i have a 12 foot pole that i welded together out of square tubing....works great, and in the field it puts it up nice and high which i have found to work great as well.

[Dave Ladomer]

i have a floating stand that we use in deep water or for the layout.

[George Kuhns]

I use 1" pvc sprayed black with a couple coats of paint.

[Montauker]

Create a square frame out of pvc pipe and have a middle tube. The middle tube then has a T connection that allows you to put a 2 foot extension and then the mojo on. I wish I had a pic right now.

Anyway- I glue all of the connections except the T connection, that allows you to fold it down for transport. You can paint the whole thing black, though I find that a light spray of black that leaves some areas gray really makes the thing disappear when sitting on water. Make sure the frame is wide enough to keep the unit from toppling over. I think I did a 30 inch square.

To float it, either use 4 decoys on each corner or zip tie pvc insulation to it. I've had mine in 1 foot waves white caps with no problem

[xdasher19]

i have 1/2" conduit abaut 6' long and if im on my boat i zip tie it to one of the poles that go up for the blond!