PDA

View Full Version : S.u.b


slaughterfest_09
08-28-2008, 10:58 PM
i recently bought my first layout out blind(SUB) and i dont know how to fold it back up. Any answers concerning which pieces to pull apart would help.

thanks

Travis Mueller
08-28-2008, 11:30 PM
Good question. Sorry man. Maybe get on the refuge? Anybody help this kid out please?

Rick Frisch
08-28-2008, 11:53 PM
I would try the FA site.

ksgoosekilr
08-29-2008, 12:39 AM
Is it an 06 model?

If so its gonna be a pain and especially sucks in the dark.....but take all 4 pins out of the doors. Then on the sides (by where the backrest lays) is a pin on each side.

Pull them out, put the little bars towards the floor, fold the blind flat, and pull the foot bag up towards the head of the blind. Thats as folded up as its going to get for you.

Bob "Chappy" Chaplin
08-29-2008, 07:57 AM
This should help you out.

http://www.foilesstraitmeat.com/forum/

slaughterfest_09
08-29-2008, 10:38 AM
its the new 08 model

IAsnow goose
09-06-2008, 04:28 AM
I wouldn't have a clue about the newest model. But the one I bought in 06 at Roger's is real simple to take apart and lay flat. 6 pins total.

Michigan Killin Crew
09-06-2008, 06:50 AM
take all 4 pins out of the doors. Then on the sides (by where the backrest lays) is a pin on each side.

Pull them out, put the little bars towards the floor, fold the blind flat, and pull the foot bag up towards the head of the blind.

ksgoose summed it up to a "T" 06-08 models all fold the same.