|
|
#1
07-13-2003, 09:48 PM
|
|||
|
|||
Hey fellas! I am looking to buy either a PC-1 or a PM-1. Can you tell me what the difference is between the two? Is one louder than the other? Does one have a better high end or low end than the other etc..... I am guessing the PM-1 requires more back pressure from your hands, is that correct? I know the PM-1 is shorter, but what I would like to know is are the mouth pieces the same and is there any difference in the internal barrel dimensions? Also, if I would like to get a PM-1 how would I go about getting one? Thanks guys!
|
|
#2
07-14-2003, 12:09 PM
|
|||
|
|||
GANDER,
THE PM-1 IS MORE OF AN ADVANCED CALL AND THERE FOR HAS A WIDER RANGE OF TONE AND VOLUME. THE PC-1 IS MORE USER FRIENDLY AND HAS MORE OF A SHARP BREAK. BOTH CALLS HAVE THE SAME MOUTH PIECE BUT THE PM-1 HAS A BOARD OUT END PIECE FOR LOTS OF VOLUME. FOR A DEALER NEAREST YOU CALL 937-832-3436 AND ASK FOR FIELD OR E-MAIL HIM AT ZINKOUTDOORS@AOL.COM AND HE WILL HELP YOU OUT. FREDDIE
|
|
#4
07-15-2003, 04:32 PM
|
||||
|
||||
|
Gander,
You can give me a call here at the shop and I can answer any questions you might have and we can hook you up with a dealer. I will be leaving town early friday so give me a call before then and we will get you set up. Thanks, Field
__________________
Avery Pro-Staff Zink Calls
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
