|
|
#1
07-31-2006, 08:34 PM
|
|||
|
|||
real motion kit
just received 2 24 packs of them today from macks. I think everything thing was in the packages except for the easy 1 2 3 instructions .
 (dang it) Came with cones, stakes, screws/nuts, and sticky foam circle dealeos. I'm planning on doing 48 full body hunter series actives and feeders, could you post the instructions please, its gonna be hard to sleep untill i get one done.Thanks in advance  
|
|
#2
07-31-2006, 08:41 PM
|
||||
|
||||
|
The first thing you will need to do is find the balance point. Once you find the balance point, drill the screw through the top of the decoy. The rubber washer will go between the inside of the body and the cone. Put the nut on the screw on the inside of the cone and you are finished. Let us know how the decoys turn out.
__________________
Curt Wilson Territory Manager Avery Outdoors
|
|
#3
07-31-2006, 09:09 PM
|
|||
|
|||
|
Jeffrey,
Give me a call on Tuesday at 800-333-5119...I have these instructions on my computer at work and I'll be happy to e-mail them to you. Thanks,
__________________
Daryl Neal
|
|
#4
07-31-2006, 10:07 PM
|
|||
|
|||
|
Not to take over your post. But, I have a question too. Does the real motion kits work on the shell decoys too? Thanks
__________________
Mallard University-President "Where we achieve high standards in educating waterfowl one shot at a time!"
|
|
#5
07-31-2006, 10:18 PM
|
|||
|
|||
|
The Real Motion Kit will work on the shells but if you install it, they won't stack which is why we wnt with the Universal Motion Stakes.
__________________
Christian Curtis Territory Manager Avery Outdoors
|
|
#6
07-31-2006, 10:53 PM
|
|||
|
|||
|
Quote:
|
|
#7
07-31-2006, 11:37 PM
|
||||
|
||||
|
Daryl,
If you would please e-mail me the instructions and post here. Thanks,
__________________
Rick Frisch Territory Manager Avery Outdoors
|
|
#8
08-01-2006, 10:11 PM
|
|||
|
|||
|
i did'nt get the email today but i think i figured it out. find the center point, drill it, insert the screw in the hole, put the foam on top of the cone, put the cone in the decoy, put the nut on, hold it with a needle nose, and tighten the screw. at least thats what I did, (1 feeder & 1 active) just to see. I like it a lot. I will wait to do the others till i get the instructions. but they move real nice, especially the feeder.
|
|
#9
08-01-2006, 10:33 PM
|
||||
|
||||
|
I am glad we could help. Let us know how the entire spread turns out. You have the right idea, movement is the key to a life like decoy spread.
__________________
Curt Wilson Territory Manager Avery Outdoors
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
